Large Diameter Gages Large Diameter Gages
Home About Us ID/OD Gages Large Diameter Gages Specialty Gages Contact Us
Large Diameter Gages

LARGE DIAMETER GAGES

Kent Gage provides both Fixed and Adjustable Large Diameter Gages.

Fixed Dimension Large Diameter Gages
Model 4000 Series
Straight Frame
A straight frame gage designed specifically as a “single dimension” gage for high production use where no interference is encountered.  The Model 4000 Series is available in three gaging depth ranges; 0” – 1”, 1” – 2” or 2” – 3” depending on the need and is furnished with a dial indicator with .0005” graduations.

Click here for detailed info on our straight frame gages.

Model 4100 Series
Donut Frame
A donut frame gage is a single dimension gage constructed to allow for central interface cause by part obstruction of a fixture set up. The frame is selected by part print to allow clearance completely around the interference, but maintain accurate rigid centerline diameter gaging.  The Model 4100 Series is available in three gaging depth ranges; 0” – 1”, 1” – 2” or 2” – 3” depending on the need and is furnished with a dial indicator with .0005” graduations.

Click here for more info on our donut frame gages.

Model 4200 Series
“C” Frame
This large diameter gage is specifically designed to encircle the part being gaged. The advantages of this design are obvious as central obstructions or long part units are encountered.  The Model 4200 Series is available in two gaging depth ranges; 0” – 1” & 1” – 2” depending on the need and is furnished with a dial indicator with .0005” graduations.

Click here for more info on our C frame gages.

Model 5000 Fixed Dimension
Sturdy parallel bar, stress relieved steel with central reinforcement construction. Rest plates are hardened steel and fixed contact anvil is grooved for positive alignment. Adjustable anvil is radiused. Four point rest dowels allow easy positioning on any tooled or surface plate.  Available in gaging depths of 0” – 1”, 1” – 2” or 2” – 3”.

Large Diameter Adjustable Gages
Model 4300 Series
Model 4300 is similar to the straight frame series 4000, but with additional capability for adjustment to any dimension within its 6” range.  
This model has a gaging depth of 0” – 2” or 0” – 5”.

Click here for more info on our Model 4300 Series.

Model 5300 Series
Reference masters for the 4300 and 4500 adjustable ID, OD gage.
This model has a gaging depth of 0” – 2” or 0” – 5”.

Kent Gage & Tool Company, Inc. • 29 Victory Lane, Poughkeepsie NY 12603 • 845-868-7038 • Fax: 845-868-7259
Home | About Us | ID/OD Gages | Large Diameter Gages | Specialty Gages | Contact Us
Copyright © 2015 Kent Gage & Tool Company, Inc. All rights reserved. Site designed and hosted by The Job Shop Company.